If the plug does not fit the wall socket, detach the supplied plug adaptor only for models equipped with an adaptor. The clock is on a hour system for the European model, and a hour system for other models. The hour system is used for illustration purposes.
With the label side up. When you play a CD single 8 cm CD , place it on the inner circle Page 11 Insert a recordable MD. With the label side up, and the shutter on the righthand side With the arrow pointing toward the deck Press CD Z and place a CD on the disc tray.
When you play a CD single 8 cm CD , place it on The recording level is automatically adjusted. If you start from the reverse side, recording stops at the end of the reverse side.
You can play an MD just like a CD. With the label side up, and the shutter on the righthand side With the arrow pointing toward the deck The MD deck stands by for recording and the tape deck pauses for play. To turn on the system, press? Page 20 Recording from the radio continued Insert a recordable MD. Press CD NX. Shuffle Play starts. The track is programed.
The number of the last programed track appears, followed by the total playing time of the program. If you have made a mistake, you can clear the last programed track from the program by pressing CLEAR.
When a CD TEXT disc is loaded, you can check the information recorded on the disc, such as the titles or artist names. Whenever you load a labeled CD, the title appears in the display.
You cannot enter a space as the first character. To enter a symbol You can use the following 24 symbols. Add a track to Perform steps 3 and 4. The TOC is updated and recording is completed. Page 36 Starting recording with 6 seconds of prestored audio data continued Insert a recordable MD. The MD deck stands by for recording. Start playing the desired source to record.
Page 38 Marking track numbers continued Press. Press N on the remote. Recording starts. To stop recording Press MD x. Page Making A Space Between Tracks 3 Seconds Making a space between tracks 3 seconds long — Smart Space The Smart Space function lets you make the blank spaces between tracks 3 seconds long automatically while making a digital recording from a CD. For other types of recording, if the Smart Space function is on and there is no sound input for about 3 seconds or more but less than 30 seconds while recording, the MD deck Page 40 Making a space between tracks 3 seconds long continued Press.
Page Adjusting The Recording Level Adjusting the recording level When recording on an MD, you can adjust the recording level to the desired volume. You can adjust the recording level not only when making an analog recording, but also when making a digital recording from a CD, etc.
Press x on the remote. Monaural recording Stereo signals such as an FM stereo broadcast can be converted to monaural format and recorded. By using the editing functions, you can create a new sequence to the recorded MD. The character you selected in step 4 stops flashing and the cursor shifts to the right.
Repeat steps 3 to 5 to complete the entire title. To erase all the titles, press. Page 50 Erasing recordings continued While monitoring the sound, press. To shift the point by second or minute intervals, press m or M so that second or minute flashes, then press. Page Moving Recorded Tracks Moving recorded tracks — Move Function You can use this function to change the order of any track on the disc.
When you move tracks, the tracks are automatically renumbered. Example: Moving track 3 to position 2. Page Dividing Recorded Tracks Dividing recorded tracks — Divide Function You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered.
Example: Dividing track 2 into two tracks. Track number Original This happens when you have edited the same track many times. This is due to a technical limitation of the MD system and is not a mechanical error.
One of the following messages appears, depending on the last edit. The tape deck stands by for recording and the CD player pauses for play. You can also record a program of favorite tracks. Recording tracks in the same sequence as the original MD Insert a blank tape.
You can also record a radio program. Model No. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside the unit.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Keep the speaker cords away from the antennas to prevent noise.
Set up the AM loop antenna, then connect it. When the remote no longer operates the system, replace both batteries with new ones. If the plug does not fit the wall socket, detach the supplied plug adaptor only for models equipped with an adaptor.
Micro HiFi. The model and serial numbers are located on the rear panel of the unit. Record the serial. Refer to them whenever you call upon your Sony. To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the. The use of optical instruments with this product will. This equipment has been tested and found to comply.
These limits are. However, there. If this equipment does cause. You are cautioned that any changes or modifications. Step 1: Hooking up the system Step 2: Setting the time Step 3: Presetting radio stations Playing a CD Recording a CD on an MD or a tape Playing an MD Playing a tape
0コメント